ºÚÁÏÉç

ºÚÁÏÉç? Flashing Tape is a self-adhered flashing tape with improved workability made from polypropylene film with a butyl rubber adhesive backing. Engineered to withstand the rigors of the job site. ºÚÁÏÉç? Flashing Tape helps create a durable seal against water intrusion around heads and jambs of rectangular windows and doors.

In addition to bulk water holdout, ºÚÁÏÉç? Flashing Tape can help control air leakage. Where windows and doors interface with sheathing or the ºÚÁÏÉç? Tyvek? Water-Resistive Barrier (WRB), ºÚÁÏÉç? Flashing Tape can help keep heated and cooled air in and exterior air out more effectively.

As part of a complete building envelope system, ºÚÁÏÉç? Flashing Tape can help reduce the risk of water damage, increase building comfort, and improve energy efficiency.

ºÚÁÏÉç? FlexWrap? is a premium extendable self-adhered flashing membrane specifically designed to provide seamless air and water barrier protection at window and door corners. Composition consists of a durable, micro creped ºÚÁÏÉç? Tyvek? top-sheet, a premium 100% butyl adhesive layer, and a specially designed split-release liner.

FlexWrap? offers a seamless application along window sill and arch-top head conditions. FlexWrap? conformability enables round-top or custom-shaped windows flashing in a seamless manner, eliminating the need to cut and place individual pieces of conventional flashing on an arched opening. Unlike some competitive flashing, FlexWrap? does not require the use of mechanical fasteners in the flexed corner.

ºÚÁÏÉç? FlexWrap? EZ is a flexible, extendable self-adhered tape with a 100% butyl-based adhesive layer that helps create an air and water-tight seal around penetrations of all different shapes and sizes. FlexWrap? EZ provides an option for home builders, trade contractors and remodelers to easily seal around non-flanged objects that penetrate the building envelope.

Suitable for both residential and commercial applications, FlexWrap? EZ is ideal for flashing around many smaller wall protrusions like plumbing and HVAC components, vents, wires, exterior electrical outlets, exterior lights, exhaust fans, dryer vents, hose bibs, gas lines and more ¨C a fast and easy solution to help improve energy efficiency and the durability of a wall system.

ºÚÁÏÉç? LiquidArmor? LT Flashing and Sealant is a durable, flexible, single-component silicone flashing alternative suitable for low-temperature applications, designed to provide commercial buildings with advanced moisture and air sealing protection. It forms tight and seamless barriers along the rough openings of windows and doors as well as insulation board joints. Compatible with ºÚÁÏÉç? Commercial Wall Systems and foam insulation products, LiquidArmor? LT is formulated as a cold weather alternative to LiquidArmor? QS, allowing application as low as -20 ¡ãF (-29 ¡ãC).

LiquidArmor? LT features a long tooling time to facilitate workflow of prepping a whole window opening and is designed to have high abrasion resistance and durability during the window and door installation process. It seals gaps up to 6mm (1/4 in.) wide and offers a reliable replacement to peel and stick flashing tapes as well as liquid flashing products that require a mesh.

LiquidArmor? LT is trowel-applied after either dispensing from a sausage gun or directly from a pail. It works on a wide range of surfaces without primer, including foam boards, steel studs, fiberglass-faced gypsum board and concrete masonry units. The moisture-cured, fluid flashing solution seals around screws and veneer anchors, resulting in a durable and resilient barrier suited to withstand jobsite variations. Once LiquidArmor? LT is applied at board joints and penetrations, it forms part of a continuous air and moisture barrier per ºÚÁÏÉ硯s commercial wall systems.

ºÚÁÏÉç? LiquidArmor? QS Flashing and Sealant is a quick skinning, innovative, liquid flashing solution designed to provide advanced moisture and air sealing protection to commercial buildings. A unique alternative to flashing tape, the elastomeric spray forms a tight, seamless barrier along the rough openings of windows and doors while helping to significantly reduce labor time.

LiquidArmor? QS offers excellent sealing for the installation of the Thermax? Wall System and or the Ultra Wall System. The liquid flashing solution covers and seals hard-to-reach gaps up to a quarter inch wide and offers a reliable replacement to peel and stick flashing tapes commonly used on board joints of commercial buildings. The versatile, water-based coating of LiquidArmor? QS works on a wide range of surfaces, including foam boards, steel studs, concrete masonry units, tapes and wood buck. With sprayable, aqueous technology, it facilitates a consistent application using commonly available airless paint sprayers.

LiquidArmor? QS seals around screws, veneer anchors and penetrating fasteners, resulting in a durable and resilient barrier suited to withstand job site variations and long-term building performance. Once the sealant sets to the final elastomeric solid, the treated area is protected and helps provide superior air leakage and moisture control as part of a joint treatment with ºÚÁÏÉ硯s commercial wall assemblies.

ºÚÁÏÉç? StraightFlash? is an innovative, single-sided, self-adhered flashing solution that bridges the gap between the rough opening and building envelope to protect against water intrusion around heads and jambs of rectangular doors, windows and other gaps. By sealing vulnerable areas around openings, ºÚÁÏÉç? StraightFlash? can help improve the durability and energy efficiency of both homes and commercial structures.

ºÚÁÏÉç? StraightFlash? flashing combines a ºÚÁÏÉç? Tyvek? topsheet with a 100% butyl-based adhesive layer, merging the strength, durability and water resistance of Tyvek? material with the convenience and flexibility of a self-adhered flashing. The result: premium door and window flashing protection that helps keeps rain out and integrates seamlessly with other ºÚÁÏÉç? air and water barriers in a complete building envelope system.

ºÚÁÏÉç? Tyvek? IntegrationWrap? is a coated woven polypropylene membrane that connects or ¡°integrates¡± ºÚÁÏÉç Self-Adhered Flashing Products at the window/door with the ºÚÁÏÉç? Tyvek? WRB on the wall in single-family residential and wood-framed multi-family/light commercial construction. This flashing integration membrane helps provide an easy means of preparing rough openings prior to the installation of the primary Tyvek? WRB, which can help reduce building dry-in times and facilitate the sequence of trades during the construction process.

ºÚÁÏÉç? Tyvek? Fluid Applied Flashing and Joint Compound+ is a full-bodied, trowel-applied, vapor-permeable elastomeric flashing material. It combines the functions of both flashing and joint compound into a single unique product that is an integral part of the ºÚÁÏÉç? Tyvek? Fluid Applied System.

Tyvek? Fluid Applied Flashing and Joint Compound+ is Air Barrier Association of America (ABAA) evaluated and satisfies ASHRAE 90.1 and IECC maximum air leakage requirements.